How to use epoxy steel adhesive?
TIME:2015-12-16 FORM:admin HOT:436
Use Method
Meas:53x34.5x36cm
Previous--Next
1.Remove the oil, dust from the surface and keep clear, dry.
2,Paste evenly at 1:1 from two tubes, paste separately on each side and press for solidification. Normally solidify after 5-8 at normal temperature, reach the highest at 24 hours
Warning
1,The taking glue tool could not mix use, should be tightly sealed,do not mix Cap A and B.
2,The glue quantity should not exceed, use at the scene. The operation place should be ventilate and far from fire.
3,Avoid the skin contact, if touches the skin, clean with soap water, if touches the eye carelessly, uses the massive clear water flushing immediately, go to hospital for serious situation.
4,Do not get into mouth, keep out reach of kids.
5,Make a trial usage in advance to avoid mistake.
Storage and Packing
1.with one year life time in cool and dry condition at normal temperature,avoid dierct sunlight. Preserve and transport as common dangerous products by trucks or train.
2.Preserve and transport as non dangerous prouducts.
Specification:
20g/set,10sets/inner,12inners/ctn
- Kater Adhesive Industrial Co.,Ltd
- Tel:0086-15802505488
- Fax:0086-757-85203428
- Contact Person: Miss. kater customer service
- Phone:0086-13924533378
- Skype:longsealant
- Email: fix@kater-adhesive.cn
Send your inquiry directly to us