TIME：2015-12-03 　FORM：admin　HOT：506

Application:
 
Planting bar adhesive is a two-component epoxy resin modified structural adhesive, drilling anchoring is suitable for various kinds of steel, bolts and various metal material and concrete, rock, brick and other solid substrates, steel bars are widely used in building structure, the screw implant. Building structure reinforcement, anchorage. Frame structure, shear strong anchorage. A variety of equipment foundation fixed. Railway, highway, bridge, water conservancy renovation, expansion project reinforcement. Equipment foundation bolt installation, road bar reinforcement and other occasions.

Characteristic:
 
1, AB two-component mixing ratio: 1:1, excellent thixotropy, convenient and fast construction.
2, on the bare force of anchoring large reinforced, high strength, strong adhesion, as embedded.
3, after curing, toughness, excellent anti impact ability, excellent earthquake resistance.
4, anti-aging, durable, weather resistance, resistance to medium (acid, alkali, salt, water) with excellent performance.
5, do not contain volatile solvent, non-toxic environmental protection, environmental friendly.

Operation Points:

1, the construction environment should be ventilated and dry, use a pump drill and brush thoroughly clean, where there is oil clean with acetone.
2, the test must be carried out in accordance with the modulation glue environment, temperature and process conditions prior to use to determine the best ratio.
3, room temperature curing adhesive temperature of not less than 5 °C, 20-25 °C ambient temperature curing time of less than three days, at 10 °C ambient temperature curing time of not less than seven days; cryogenic rubber in -15 ~ 0 °C environment temperature curing.
4. Do not touch the front completely cured reinforced or screw, otherwise it will affect the anchoring effect.
5, in order to ensure the A, B two-component mixing, with mechanical agitation is appropriate.

Previous--Next