TIME：2015-06-05 　FORM：admin　HOT：654

Application:
1. Surface to be repaired should be clean, dry and free of oil.
2. Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately.
3. Apply to surface to be repaired. Remove excess epoxy.
4. Sets in 3-5 minutes.
 
Directions:
1.   Adequate local exhaust ventilation is required and the product must be kept off children.
2.  Wear leather glove while operating. In the event of its touch of skin or eyes, flush with fresh water or see a physician.
3. Store in dry, shaded, and ventilated condition away from the sources of heat and ignition.
4. In the event of mass use, make a pre-test to avoid the negative effect of mass operation.
 
Storage and packing:
1. Store on shady and cool place. The shelf life is one year. It is available to reuse based on passing of the test if being beyond the shelf life.
2. Preserve and transport as non-dangerous product.
 
Execution criterion: JC887-2001
Guarantee period: 12 months

Gross weight: 56.7g/set

Previous--Next