■ A silicone based firestop sealant that provides maximum movement in
fire-rated joints, and seals through-penetration applications in fire-rated joints, and seals through-penetration applications
Easy to use one part, neutral curing, KaStar Fire rated Silicone Sealant. It
Combines excellent adhesion with durability and can be used for internal and external applications.
Product Features
■ Halogen and solvent free
■ Asbestos free
■ Simple to use and apply
■ Good adhesion without use of a primer
■ Smoke, fume, water and UV resistant
■ Excellent movement capability, meets 500 cycle requirements
■ Meets FV-0 Fireproof grade
n More than 4 hours Fire resistance without using any backfilling material according to EN 1366-4 under certain conditions.
■ Sealing construction/expansion joints
■ Top-of-wall joints
■ Metal pipes
■ Cable bundles
■ HVAC penetrations
■ Various base materials such as masonry, concrete, metal, etc.
■ Wall and floor assemblies rated up to 4 hours
n Fire resistant sealing of connection and expansion joints in constructions.
n All building and glazing joints which require a fire rating.
n Suitable for all common building materials.
Application Width |
5mm |
10mm |
15 mm |
20 mm |
25 mm |
Application Depth |
3mm |
5mm |
8 mm |
10 mm |
12 mm |
Efficiency /300 ml |
20 meters |
6 meters |
2,5 meters |
1.50 meters |
1 meters |
RESTRICTIONS;
l Damp or humid conditions will significantly extend the cure time.
l Do not apply below 5°C
The shelf life is 12 months if stored in unopened-original package in a dry place at temperatures between
+5°C and +25°C.
Bears no imminent risk to health. Check MSDS guidelines for disposal and further information concerning safety.
Product Type |
Volume |
Package |
White/Grey White/Grey (Sausage) |
300ml 600ml |
24 20 |
Basis |
: Neutral elastic silicone |
|
Consistency |
: Smooth paste |
|
pH |
: 7.5-9 |
|
Specific gravity |
: Approx. 1.4 g/cm3 |
(ASTM D 792) |
Tack-Free time |
: 15-30 min (23 °C and 50% R.H) |
(ASTM C 679-03) |
Curing Rate (mm/day) |
: Min.2 mm/day (23 °C and 50% R.H) |
|
Shore A hardness |
: 40 ± 5 Shore A |
|
Volume shrinkage |
: Approx. 0 – 5% |
(ASTM D 412) |
Movement capability |
: Approx. 33% |
(ASTM D 412) |
Application Temperature |
: +5 °C to +40 °C |
Flame spread: 0 Smoke development: 25 |