dry black hot melt adhesive manufacturers
Product information
Kastar 025 Dry black Hot Melt Glue Stick
Product Description
Kastar025 as Polymer Ethylene Vinyl Acetate (EVA) for Main Material Based Hot Melt Stick in Transparent Color,Not Join in Water or Solvent Rapid completely.Wide using in Plastic,Ceramic,Metal,Wood ,Electronic,Electrical Components,Packing,Shoes,Toys,
Paper Products,Handcrafts,DIY,Garment,Fabric,Gifts,Crafts,Electronic,Pottery etc.
General as a Factory and Family Apply Through the Hot Glue Gun.
Main Ingredients
EVA Copolymer,Tackifying Resin,Wax,Oxidation Inhibitor
Technical Data Sheet
| Product name | Hot melt glue stick |
| Color | Dry black |
| Material | EVE rubber |
| Solid content | 100% |
| Toxicity | No |
| Softing point | 80±2℃ |
| Viscosity | 6000±500mpa.s/180℃ |
| Service temperature | 120℃-140℃ |
| Open time | 15-20s |
| Curing time | 20-25s |
Properties
1.High Strength
2.Ageing Resistance
3.Non-Toxic
4.Good Thermal Stability
5.Good Film Toughness
6.100% Solid Content
Packing and Store
(1)One kg in one Bag,25kgs in one Carton./ 25kgs in one Bag,then direct in one carton.
(2)The Product Should be Stored in a Cool Dry Ventilation Place.
Notice
1.Opening and Curing time will changing follow with the Temperature Glue,Coating,Environmental change.
2.Melt System with high temperature,In order to avoid scald,do not use hand to touch.If scald,please let scald place immersion in water at least ten minutes,then sent to hospital treatment.
